Plastic Injection Molding Factory | PTMS

Connector with Metal made by plastic injection molding factory

We are a leading plastic injection molding factory and specialize in all kinds of plastic parts.

In order to provide quality products to the worldwide customers, over years efforts, there are some advantages in our factory.

Enough machines: Some tooling machines which include CNC, wire cutting, EDM and etc. some auto injection machines which from TOYO, Haitian.

Engineers: The engineers have much experience in tooling design and they can know how to save the cost and make it easy for demoulding.

Employees. The professional employees work hard and make the quality parts, meanwhile, the QC will inspect the parts with inspection machines and find some mistakes, if possible, they will send the reports to customers and the tooling team will modify these mistakes.

Quality original materials: As a professional plastic injection molding factory, the tooling materials should be passed SGS, ISO9001 certifications, plastic materials should be passed FDA SGS, ISO9001 or other related certifications. The materials are very important and we always use the quality original materials and make sure quality products.

Here is connector with metal, very small size, precision parts made by Nylon + 30% GF, it should be secondly tooling with small metal, the accuracy is +/-0.001mm, very difficult.

PTMS is an ISO9001-2008 certified injection molding factory in China, we would like to provide many projects solutions to the worldwide customers.

Comments

Post a Comment

Popular posts from this blog

4 Types of Injection Molding Technology

Image
From elaborate designs to simple products, injection molding can be used to make full production runs in the millions, a small number of prototypes, or anything in between. There are several injection molding technologies available to manufacture your next products. Here, we highlight 4 technologies that you may use to bring your product to life with higher quality in a shorter time. 1. Liquid silicone injection molding Thermoset is the majority of injection molding, meaning a part is created by injecting cold material into a very hot mold. In this process, the part is cured so it can never melt again. However, if you need a part to tolerate chemical agents or extremely high temperatures (as you might with certain car parts or medical devices), you may need thermoplastic injection molding , which uses liquid silicone frequently. 2. Metal injection molding Metals can also be injection molded. This new technology is considerably costlier than plastic injection molding and typically ser
Read more

Plastic Injection Molding: Benefits and Limitations

Image
One of the most commonly used methods of manufacturing identical plastic products in bulk is injection molding. However, like every process, it’s important to understand the specific design restrictions that must be considered to facilitate the obvious benefits of successfully producing high-quality, cost-effective parts. Here, we talk about the benefits and limitations of plastic injection molding: Benefits Low cost per part Although the initial high investment for the plastic injection molding tool is high, the cost per part is pretty low. While other plastic processing techniques may need a number of operations, such as polishing, injection molding can do everything at once. If you decide to do CNC machine apart, it may be costly. Injection molding will be your best bet if you’re looking to go into full production. High repeatability Once you’re done making mold tools, it’s possible to produce similar products repeatedly. The mold life of a decently made mold is quite lengthy – as
Read more

Double Injection Molding | PTMS

Image
Our company have much experience in  double injection molding  mass production since 2010. Double means double color, or double different plastic resin, it is also called double molding. In the fact, the cost of double parts is very expensive at this stage, because injection machine cost is very high, it needs double injection machine to produce the mass production. The machine has two hoppers for the different materials or colors, this cost is very expensive, but the double parts look very nice. The application of this injection is just limited, because it is not widely used in the different industries right now, so the cost cannot be cut down. The less, the little, the high cost we think. Here is a product made by double injection molding, it looks like a two-color basket, it is made of white hard glue PP and red soft glue TPE, the two different plastic resin is food grade, the soft TPE can be foldable, this part is portable and durable, but the mold is very simple, not very difficul
Read more